Emptying the toilet holding tank

  1. Ensure internal valve is set for suction / pump out from deck fitting
  2. Open the smaller deck fitting for flushing in clean water (not where you fill the water tank). Ensure you store the cap on the shelf inside the boat.
  3. Open the larger deck fitting for pump out of black water tank. Ensure you store the cap on the shelf inside the boat.
  4. Pump out black water tank following the video below.
  5. Flush some fresh water down the deck fitting for flushing black water tank with water.
  6. Pump out what is left in the black water tank
  7. Ensure all caps are put back firmly

Comments are closed.